Slideway Position. - Keencut

This topic has 2 replies, 2 voices, and was last updated 3 years, 7 months ago by DevinShields.

Viewing 2 reply threads

Author

Posts
- February 15, 2021 at 5:26 pm #29971
  
  DevinShields
  Participant
  
  My company recently purchased the Keencut Flexo Plate Cutter and there is some debate over how the slideway is supposed to work. Some of us think that it’s supposed to be a little loose as to accommodate different thicknesses of plates and others believe that it’s supposed to be in a fixed position and not able to move at all. Is it supposed to be loose of fixed?
- February 15, 2021 at 5:59 pm #29972
  
  Technical
  Participant
  
  Hi Devin,
  
  As you say, it is supposed to rotate so that it lays flat on any thickness. However, it should not rotate such that it does so easily when the slideway is raised and flops over to the right, if that is happening try lifting the black handle up all the way and rotate the slideway one full turn clockwise then return the black handle down to its normal position and see if it flops over still. If it does repeat the process (although this is unlikely).
  
  Hope that helps
  
  Keencut
- February 15, 2021 at 7:18 pm #29973
  
  DevinShields
  Participant
  
  Thank you very much for getting back to me so quickly. Thats the information I need and more. I greatly appreciate the help.
  
  -Devin K. Shields
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.

Forgot your password?

I agree with the Terms and Privacy Policy