Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

How to replace the cutting head cover on the SteelTrak

To do this you will need the SteelTrak head cover assembly >

Tools required:

  • Spanner 10mm

 

What to do

  • Unscrew the black knob and swing the cover down
  • Remove the dome headed nut and washers using the 10mm spanner/wrench
  • Replace the guard followed by the steel washer, rubber washer and dome headed nut
  • Tighten the nut so the guard swings up and down but is not loose to fall
  • Swing the guard up and refix the black knob

Did you find this helpful?

Yes / No