Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

How to replace the LH & RH end cap & screws

To do this you will need the Sabre & Sabre Series 2 LH & RH end cap & screws >

Tools required:

  • Posi screwdriver
  • Brush/cloth for cleaning
  • Silicon spray lubricant or lithium grease

 

What to do

  • Remove the end cover by undoing the three fixing screws using a Posi screwdriver
  • Clean around the hinge area and remove any debris with a brush, lubricate the oval hole in the arm with a small amount of lithium grease or silicon lubricant.
  • Replace end cover, do not overtighten the screws.
  • Repeat on opposite end.

Did you find this helpful?

Yes / No