This guide is relevant for both the Evolution3 SmartFold and Evoution3 BenchTop.

Occasionally in transit the metal lift leg that the handle attaches to get jolted out of place. You can see an example in the image where the metal lift leg has moved across, so it is flush with the inner part of the machine and the handle won’t go into the correct place.

The correct handle postion is shown here and you can see the metal lift leg is to the outside of the machine and it is the lever that is closer to the inner part of the machine.

If this has happenned use a small screwdriver, hex key or metal ruler to gently push the metal lift leg over just enough to then wiggle the handle in position.