1
00:00:00,000 --> 00:00:03,712
SteelTrak is the market leading vertical cutter

2
00:00:03,712 --> 00:00:06,673
and it's just got even better

3
00:00:06,673 --> 00:00:09,384
Keencut was asked to create a new head

4
00:00:09,384 --> 00:00:11,011
which could cut steel composite panel

5
00:00:11,011 --> 00:00:13,096
within tight flatness tolerances

6
00:00:13,096 --> 00:00:16,933
Any curve on the SCP above one sixteenth of an inch

7
00:00:16,933 --> 00:00:18,893
can cause interference problems

8
00:00:18,893 --> 00:00:21,438
when using a flat bed printer

9
00:00:21,438 --> 00:00:23,940
Keencut engineers responded by re-designing

10
00:00:23,940 --> 00:00:25,400
the twin wheel cutting head

11
00:00:25,400 --> 00:00:27,777
with fantastic results

12
00:00:27,777 --> 00:00:30,071
The new C2 composite cutting head

13
00:00:30,071 --> 00:00:31,781
still slices easily through the

14
00:00:31,781 --> 00:00:34,367
toughest materials to leave a smooth edge

15
00:00:34,367 --> 00:00:37,662
with no need for extra finishing

16
00:00:37,662 --> 00:00:40,665
but now it offers even more

17
00:00:40,665 --> 00:00:42,625
The new head cuts steel composite panel up to 

18
00:00:42,625 --> 00:00:45,795
one eighth of an inch

19
00:00:45,795 --> 00:00:47,839
without creating dust or sparks

20
00:00:47,839 --> 00:00:49,507
and so eliminates the risk of fire

21
00:00:49,507 --> 00:00:51,342
in the workshop

22
00:00:51,342 --> 00:00:53,386
The larger head significantly reduces curve

23
00:00:53,386 --> 00:00:55,638
on the cut steel composite panel

24
00:00:55,638 --> 00:00:58,683
This guarantees successful flat-bed printing

25
00:00:58,683 --> 00:01:00,852
and minimises waste

26
00:01:00,852 --> 00:01:03,438
Using the new C2 composite cutting head

27
00:01:03,438 --> 00:01:05,607
there's no bend at all

28
00:01:05,607 --> 00:01:06,775
making it well within

29
00:01:06,775 --> 00:01:08,568
the one sixteenth of an inch printing tolerance

30
00:01:08,568 --> 00:01:11,237
of a flatbed printer

31
00:01:11,237 --> 00:01:13,323
The new head also dramatically reduces

32
00:01:13,323 --> 00:01:16,785
the curve on aluminium composite

33
00:01:16,785 --> 00:01:18,703
With the old twin wheel cutting head

34
00:01:18,703 --> 00:01:21,122
the bend is five eighths of an inch

35
00:01:21,122 --> 00:01:24,250
This is reduced to three thirty seconds of an inch with the

36
00:01:24,250 --> 00:01:26,127
new C2 composite cutting head

37
00:01:26,127 --> 00:01:27,879
The head’s extended length

38
00:01:27,879 --> 00:01:30,840
also lessens the effort required for each cut

39
00:01:30,840 --> 00:01:33,718
so it’s even easier to use

40
00:01:33,718 --> 00:01:35,595
SteelTrak is now supplied with

41
00:01:35,595 --> 00:01:37,097
the new C2 composite cutting head

42
00:01:37,097 --> 00:01:38,723
as standard

43
00:01:38,723 --> 00:01:40,683
and existing SteelTrak users

44
00:01:40,683 --> 00:01:41,601
can purchase the new head

45
00:01:41,601 --> 00:01:45,396
directly from their Keencut dealer