Search
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt

How to replace the cutting head return spring on the Excalibur 3S

To do this you will need the Excalibur 3S head service kit >

Watch a video how replace the cutting head return spring on the Excalibur 3S >

No tools required

 

  • Remove the old spring by unlatching the outer leg of the spring from its groove on the cutter head casting.
  • Rotate the spring coil on its plastic mandrel until the other shorter leg of the spring comes free.
  • Pull the coil free from its mandrel.
  • Insert the short leg of the spring into the gap between the black casting and the carriage and feed the coil onto its plastic boss so that the long leg of the spring is pointing vertically up.
  • Rotate the leg leg clockwise when viewed from the left and latch it under the groove in the casting on the edge of the raised circular upstand.

Did you find this helpful?

Yes / No